Introduction
- Joined 1 year ago
- 1 Achievement
- 145 Points
Pinned Items
Recent Activities
-
Mick commented on this post about 3 months agoStarted mocking up the suspension today. Yes, I know its upside down but I am just testing everything for sizing, width etc.
I have these solid 50mmdia x 30mm discs for the front, they will get recessed into the end of the chassis for a nice round look, and will also support the end of the spring. I haven't cut the shape in yet as I don't want...Started mocking up the suspension today. Yes, I know its upside down but I am just testing everything for sizing, width etc.More
I have these solid 50mmdia x 30mm discs for the front, they will get recessed into the end of the chassis for a nice round look, and will also support the end of the spring. I haven't cut the shape in yet as I don't want to disturb the chassis until after I start welding.
I made up these 50x10 SHS pieces for the end of the springs to slide in.100000Comments (1)-
MickNice work. Love the design.3 months agoReported
Post is under moderationStream item published successfully. Item will now be visible on your stream. -
-
Today I mocked up the engine and seat position.Post is under moderationStream item published successfully. Item will now be visible on your stream.
-
I'm using a 75 x 25 section for the chassis. I have tapered the front. I haven't welded it yet as I may change my mind on the angle. Doing it all in stainless so for.Post is under moderationStream item published successfully. Item will now be visible on your stream.
-
Mick commented on this post about 3 months agoCut up the frame and laid it out on the fabrication table. I'm happy with the dimensions.001000Comments (1)Post is under moderationStream item published successfully. Item will now be visible on your stream.
-
-
Started yesterday afternoon by test fitting the rear axle bits and bobs. A bit of machining and mucking about, but its now all there.Post is under moderationStream item published successfully. Item will now be visible on your stream.
-
Stream item published successfully. Item will now be visible on your stream.
-
Post is under moderationStream item published successfully. Item will now be visible on your stream.
-
A lot of the guys in France and UK use these wheels. I believe there may be a 4 stud hub from an ATV that will bolt up.Post is under moderationStream item published successfully. Item will now be visible on your stream.
-
Post is under moderationStream item published successfully. Item will now be visible on your stream.
-
Post is under moderationStream item published successfully. Item will now be visible on your stream.
There are no activities here yet
You need to login to read the rest of the stream items.
Unable to load tooltip content.